Skip to product information
1 of 3

RUPES

Rupes Polisher LUX kit Nano iBrid, long neck, HR81ML/LUX

Rupes Polisher LUX kit Nano iBrid, long neck, HR81ML/LUX

Regular price €889,95 EUR
Regular price €1.046,95 EUR Sale price €889,95 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

Rupes polishing machines are the best on the market. The Nano iBrid is a great little polisher for getting into tight spots like rims, engine bays, piano painted interiors, dashboards, etc. The iBrid Nano is powered by battery or mains adapter.
Mains adapter and 2 batteries included. Polish with both oscillating and rotating settings Drive hub on 3mm orbit for wet sanding with full control. 12mm drive hub for efficient polishing
Battery operation on Rupes iBrid is no problem. About 30 minutes of operation, but it only takes 20 minutes to fully charge, i.e. if you Ex buy the DLX package, it comes with 2 batteries, then you will never stand still. And even if you only have one battery, you can run on direct mains power from a 230v outlet

Characteristics:

  • Powered by battery or mains adapter
  • Mains adapter and 2 batteries included
  • Clean with brushes (soft or hard)
  • Polish with rotary setting
  • Drive hub on 3mm orbit for wet sanding with full control
  • 12mm drive hub for efficient polishing

SWEDISH GLOSSARY Tips:

  • 1x Rupes iBrid Long Neck
  • 1x Hard storage box
  • 2x Lithium-ion batteries
  • 1x Lithium fast charger
  • 1x Mains adapter 230v
  • 1x Drive hub for rotating movement
  • 1x Oscillating drive hub b 12mm stroke
  • 1x Oscillating drive hub b 3mm stroke
  • 1x Mounting plate 34mm
  • 1x Fixing plate 34mm (Grinding)
  • 1x Fixing plate 50mm (Polishing)
  • 1x Rupes extender stay
  • 1x Soft brush (Horse hair)
  • 1x Hard brush (Nylon)
  • 4x Rupes Foam Disc Blue 54/70mm (Coarse)
  • 4x Rupes Foam Disc Yellow 54/70mm (Fine)
  • 4x Rupes Foam Disc Blue 34/40mm (Coarse)
  • 4x Rupes Foam Disc Yellow 34/40mm (Fine)
  • 1x Rupe DA Coarse Compound 250ml
  • 1x Rupes DA Fine Compound 250ml

Warning information:


  • Never use the largest mounting plate (50mm) together with the rotating hub.
  • Never load the machine too hard, only the weight of the machine or light pressure at vertical angles.
  • Never press down the lock button on the bevel gear while the battery or mains power is connected. Also make sure that when changing hubs that the button is fully depressed so that the cogs do not wear.
  • Do not transfer hubs.
  • Use Rupes Claw Pad Tool when changing the polishing pad, do not pull off by hand.

View full details