Rupes Polisher STB kit Nano iBrid, short neck, HR81M/STB

Rupes polishing machines are the best on the market. The Nano iBrid is a great little polisher for getting into tight spots like rims, engine bays, piano painted interiors, dashboards, etc. The iBrid Nano is powered by battery or mains adapter.
Mains adapter and 2 batteries included. Polish with both oscillating and rotating settings Drive hub on 3mm orbit for wet sanding with full control. 12mm drive hub for efficient polishing
Battery operation on Rupes iBrid is no problem. About 30 minutes of operation, but it only takes 20 minutes to fully charge.

The HR81ML/STB includes the following:

• 1pc 9.HR81ML nano short neck
• 1 pc 9HC120LT charger
• 2 pcs 9HB120LT batteries Li-ion
• 1pc 996.001 50mm support plate with velcro
• 1pc 58.390/C drive hub 12mm oscillation

Characteristics:

• Powered by battery or mains adapter
• Mains adapter and 2 batteries included
• Clean with brushes (soft or hard)
• Polish with rotary setting
• Drive hub on 3mm orbit for wet sanding with full control
• 12mm drive hub for efficient polishing

SWEDISH GLOSSARY Tips:

-

Warning information:

• Never use the largest mounting plate (50mm) together with the rotating hub.
• Never load the machine too hard, only the weight of the machine or light pressure at vertical angles.
• Never press down the lock button on the bevel gear while the battery or mains power is connected. Also make sure that when changing hubs that the button is fully depressed so that the cogs do not wear.
• Do not transfer hubs.
• Use Rupes Claw Pad Tool when changing the polishing pad, do not pull off by hand.