Skip to product information
1 of 5

PUREEST

Paint sealer P5 Ceramic, 50ML

Paint sealer P5 Ceramic, 50ML

Regular price 995 SEK
Regular price 995 SEK Sale price 995 SEK
Sale Sold out
Taxes included. Shipping calculated at checkout.

Pureest P5 is a ceramic paint protection that protects your paint. The product provides protection against dirt, UV protection and an incredible water-repellent property. The water-repellent (hydrophobic) property is one of the best on the Swedish market?
The product is designed to provide long-term protection of up to two years to facilitate the maintenance of your vehicle.

ATTENTION! Can also be applied to plastic parts that have turned gray to bring back the black original shade.

Characteristics:

  • Lacquer sealing of vehicles
  • Durability up to 24 months
  • Provides UV protection
  • Weather resistant
  • Permanent bonding as protection above the varnish
  • Easy to clean, as dirt does not stick as easily
  • Size 50 ml

SWEDISHGLOSS tip:

Highly recommend using an IPA (Isopropranol based) cleaner before applying ceramic lacquer sealer.

Spray in the microfiber cloth or directly on the panel to be cleaned and dry until no grease remains. Replace the microfiber cloth if it becomes saturated or too damp.

Application of product:

  1. Start by applying a thin, full coverage layer of 5-10 drops with the application cloth the first time. (This to saturate the canvas, not as many drops are needed on the remaining panels)
  2. Carefully work in all directions one panel at a time (1X1 meter). Avoid large surfaces to ensure that the agent does not dry out.
  3. Wait 30 to 60 seconds while standing at room temperature of 20-25 degrees (you don't want the product to dry in)
  4. Wipe each panel with a microfiber cloth. (NOTE! good to have a couple of tablecloths)
  5. After you have applied and dried off all the agent, let the paint harden for 12 hours before taking the car out into traffic.
  6. Do not wash or use degreasers on the car for at least 5 days as the protection hardens during this time.

  • The product needs to be applied in temperatures between 10 and 25 degrees. Indoors in a garage is suitable. Never apply in direct sunlight.
  • Pure:est P5 hardens after being applied to the paint and should not come into contact with water for the next 12 hours for the curing to work at its best.
  • The dosing accessory should be removed after using the product and the cap replaced to reseal the product so you can use it again.
  • Opened packaging has a shelf life of 1 year.


Warning information:

H302 Harmful if swallowed.
H373 May cause damage to organs through prolonged or repeated exposure.
P102 Keep out of the reach of children
P202 Do not use the product until you have read and understood the safety instructions.
P210 Do not expose to heat/sparks/open flame/hot surfaces - No smoking.
P273 Avoid release to the environment

View full details